×
高度な製品検索メニュー

EZ-Adapter MB104U-1SMB

2.5 インチSATA SSD / HDD またはM.2 NVMe / SATA SSD対応アダプタ  USB 3.2 Gen 2(Type-C)インターフェス
製品詳細
  • EZ-Adapter MB104U-1SMBを使用すると、クライアントのUSB-TypeCポートを介して2.5インチSATA SSD / HDDまたはM.2 NVMe / SATA SSDにすばやくアクセスできます。 この ウルトラ ポータブル アダプタ は、USB 3.2 Gen2を介して最大10Gbpsの転送速度をサポートします。
  • すばやく簡単なドライブアクセス
    2.5インチSATAまたはM.2 SATA / NVMeドライブをEZ-Adapterに接続し、USB -Cコネクタをシステムに接続するだけで、データ転送/バックアップ/消去をすばやく実行できます。 ツールレスのドライブインストールにより、ユーザーは複数のハードドライブ/SSDを簡単に交換してアクセスできます。 注意 – アダプタは、2.5インチとM.2を同時にインストールすることをサポートしていません。
  • 比類のない転送速度
    非常に高速なデータ転送速度を体験できるのがEZ-Adapter MB104U-1SMBです。M.2 NVMe SSDに接続し、USB 3.2 Gen 2ホストと組み合わせると、この多機能なアダプタは最大1000MB/秒の転送速度を提供できます。さらに、M.2 SATA SSDまたは2.5インチSATA SSD/HDDに接続すると、MB104U-1SMBは最大600MB/秒の転送速度を実現できます。これらの印象的な速度は、効率的かつ迅速なデータ転送を保証し、EZ-Adapter MB104U-1SMBをデータ管理に欠かせないツールとしています。
  • オープンエアデザイン
    オープンエア設計により、2.5インチドライブとM.2 SSDを完全に露出させて、最大の熱放散を実現します。
  • 外出先でのデータ転送
    EZ-Adapter MB104U-1SMBは、移動性と機能性のために特別に設計されています。 アダプタは軽量で耐久性のあるデザインが特徴で、機内持ち込み手荷物やポケットに簡単に収まります。 さらに、アダプタはUSBホストバスから電力を供給され、外部電源アダプタを必要としないため、外出先での使用に最適です。
  • LED表示
    MB104U-1SMBには、ドライブアクティビティ用のLEDインジケータが装備されています。 ドライブにアクセスしているときは、アダプタの青いLEDライトが点滅します。
主な特徴
1 x 2.5インチSATA SSD / HDDまたはM.2 SATA / NVMe SSDを搭載可能(2.5インチドライブとM.2ドライブを同時に使用することができず、どちらの使用になります)
   
USB 3.2 Gen 2で最大10Gbpsの転送速度をサポート(ドライブとホストの仕様による)
   
迅速なデータアクセスのためのツールレスのドライブ設置設計
   
UASP、プラグアンドプレイ、TRIMをサポート
   
Blue drive status activity LED indicator
   
滑り止めゴム製フットパッド
   
USBType-C to Cケーブルが付属
   
USBバス給電–別途電源アダプタ不要
   
Windows、Mac、およびLinuxシステムをサポート
   
業界をリードする長期間の保証
   
ICYDOCKの訓練を受けた専門チームによる無料のテクニカルサポート

スペック
モデル番号 : MB104U-1SMB
色 : ブラック
対応ドライブサイズ : 1 x 2.5インチSATA SSD / HDDまたは1x M.2 NVMe / SATA SSD
ホストインターフェース : USB 3.2 Gen 2 Type C
電源入力 : USB経由
転送速度 : 最大10Gbps(ドライブとホストの仕様による)
コントローラIC : RTL9210B
構造/素材 : ABS プラスチック
寸法 (W x H x L) : 91.5 x 61.1 x 18.5 mm
製品の正味重量 : 49.9 g
パッケージ総重量 : 85.8 g
ドライブアクティビティLED表示 : デバイスの電源:青点灯; ドライブアクセス:青点滅
ホットスワップ : 対応(ドライブとホストの仕様によって異なります)
パッケージの内容 : 本体、ユーザーマニュアル、USB 3.2 Gen 2 TypeC to Cケーブル
M.2コネクタ挿入率 : 最大 5,000
SATAコネクタの挿入率: 最大 10,000
湿度 : 5%~65% RH
動作温度 : 0°C ~ 60°C (32°F ~ 140°F)
保管温度 : -35°C ~ 70°C (-31°F ~ 158°F)
コンプライアンス : CE, RoHS, REACH
保証 : 1年

FAQ

Q: ハードドライブ/SSDを取り付けてコンピューターに接続しましたが、ドライブが認識されません。

A: 考えられる問題を切り分けるために、いくつかの確認手順があります。

 

シナリオ1 – ドライブのステータスLEDが点灯しない


Ensure the connected USB port works properly and the hard drive/SSD and connector are plugged in and secured. Test the device with other USB ports if the power light is still off. If the LED lights up, but the system does not detect the drive, refer to Scenario 2. If the problem occurs through other working USB ports, please contact our customer service via  tech@icydock.com.

 

Note: Please be sure to use the USB cable that comes with ICY DOCK. If you have the same specification cable, you can replace it to see if the problem is solved.

 

シナリオ2 – ステータスLEDは点灯しているが、ドライブが認識されない


Please confirm the drive and the connected USB port are in working condition. Make sure to connect the M.2 NVMe/SATA SSD or 2.5" SATA SSD/HDD with the EZ-Adapter first using the included USB cable and then plug the USB connector into the computer system (connect the USB port before the drive may cause the system not recognize the drive). If the problem persists, please refer to Scenario 3.

 

Note: If the situation permits, we strongly recommend get your USB drivers updated, connect the device to different USB ports on the system, or replace the USB cable with the same specification to see if the connection problem is solved.

 

シナリオ3 – ハードドライブ/SSDとUSBポートが正常に動作しているが、コンピューターに接続後もドライブが表示されない


It may be because the new hard drive/SSD has not been formatted yet, or other drives have used the selected drive letter. Please go to Windows disk management to check whether the partition of the installed drive's partition is listed (refer to the tutorial for more info). After hard drive/SSD formatting or changing the code, you should able to see the drive. If the problem still exists, please refer to Scenario 4

 

Note: If you have another hard drive/SSD with the same specifications on hand, we suggest replacing the current drive with it and see if the problem is solved.

 

シナリオ4 – すべてのハードウェアの問題を排除したが、システムがドライブを認識できない


Due to the difference in power consumption between different USB specification ports, if the drive you are using requires more power than the USB port can provide, it may not be detected by the system. This situation generally occurs in the USB 2.0 port because its power supply is up to 2.5W. When the current drive exceeds 2.5W, the system will not detect it or may cause unstable transmission. If this problem occurs, we recommend using a USB 3.2 Gen 1 (also known as USB 3.0 or USB 3.1 Gen 1) port or a hard drive with a lower power consumption drive.

 

Note: For some high-capacity hard drives with higher power consumption than USB 3.2 Gen 1 4.5W, we recommend to purchase a Y cable to provide sufficient power through two USB ports.

 

USB 3.2 Gen 1 Type A to C Y cable

 

問題が解決しない場合は、 sales@seijinshoji.co.jp にご連絡をください。

 


Q: EZ-Adapter MB104U-1SMBとM.2 NVMe SSD間で既知の互換性の問題はありますか?

A: EZ-Adapter MB104U-1SMBはRTL9210Bチップセットを使用しており、市場に出回っているほとんどのM.2 NVMe SSDと互換性があります。以下は、報告されている既知の問題および互換性が確認されたSSDのリストです。

注:以下のSSDに関する問題は一部のお客様からの報告によるもので、互換性がないと断定するには時期尚早です。問題はSSDのファームウェアやホスト側の構成による可能性もあります。RTL9210Bとの互換性確認を進めつつ、互換リストを随時更新します。現時点では、動作確認済みのSSDをご使用いただくことを推奨します。

 

Click こちら互換性のある/ないM.2 NVMe SSDを報告してください。ご協力に感謝いたします!

 

MB104U-1SMBとの間で問題が報告されたM.2 NVMe SSD

 

 

MB104U-1SMBで動作確認されたM.2 NVMe SSD

 

 

 

問題が解決しない場合は、 sales@seijinshoji.co.jp にご連絡をください。

高度な製品検索メニュー
参加する クリア キャンセル
適切な製品が見つかりませんか?こちらからリクエストを送付 こちら
最高の体験を提供するためにCookieを使用しております   より詳しい情報
理解した
オンライン販売
*購入前に確認してください
日本国内での正規サポートは販売元が icydock japan のみです